Touch the Creastron touch screen to start the system.
If black screen touch screen and screen below will show up.
Touch the screen again.
Instructor Computer (desk top computer)
1. Tap on the Instructor Computer Icon.
2. Be sure the desk top computer is on.
HDMI Laptop
1. Tap the HDMI Icon on the Crestron touch screen.
2. Connect the HDMI cable to your laptop.
3. Turn on your laptop.
4. Be sure you laptop is on Duplicate or mirror image.
When Connecting a Laptop Please remember to mirror your image by either pressing FN + F8 or 
+ P (Select Mirror image). If these options do not work you might have to go to Graphic display options and may need further help. If so contact us at the number below.
VGA Laptop
1. Tap on the VGA Laptop Icon.
2. Plug in the VGA cable.
3. Plug in the mini audio cable to your laptops headphone jack. 
4. Turn on your laptop.
When Connecting a Laptop Please remember to mirror your image by either pressing FN + F8 or + P (Select Mirror image). If these options do not work you might have to go to Graphic display options and may need further help. If so contact us at the number below.
Blu-Ray
1. Tap on the Blu-Ray icon on the Crestron touch screen.
Use the crestron touch screen to control the Blu-ray player.
Utilities
Push this icon to mute the projector
Tap on the ON or OFF to Mute the projector.
SHUT DOWN
Tap on the lower left corner where it says shut down to turn the system off.
Tap the Yes to confirm shutdown
For Support call
Monday thru Thursday 7 am to 2 pm = Jay Ext 4449
2 pm to 10 pm = Doug 4494
Friday 9am to 4:30 pm = Doug 4494