FA 112 Instructions
General Projector Instructions
To use the projector, follow these steps:
- • Press the power ON button.
1.Plug in your laptop into the HDMI Cable.
2. Be sure cable is conneted to jack on wall and into computer.
3. Turn on your computer.
4. Use HDMI # 2 input (on remote)
- When connecting a Laptop Please remember to mirror you image by either pressing FN+F8 or
+ P (Select Mirror image). If these options do not work you might have to go to Graphic display options and may need further help. If so please contact us at the number below.
- Mac users click the Mac symbol
choose System Preferences. Choose displays click arrangement tab. In lower left corner of the Arrangement panel select “Mirror displays”
-
NOTE: If you do not have VGA you will need to get your own adapter. Click on the ADAPTERS link and you can see the different types of adapters that are available and will have to purchase.
IF you need help finding the adapter you need to please set up a meeting with us and we will be happy to help you find the adapter you need
• Volume Control is on the bottom left of the remote
Please shut down projector at end of class
• To turn off projector, press the power OFF button on the remote control.
You will need to press the same button again to confirm
• Please turn off the main power off to any other devices that you might have turned on.
For help with Audio Visual Systems call 773 442 5060 or email callctr@neiu.edu. For Internet or computer problems
Please call 773-442-4357 or xt. 4357 or email helpdesk@neiu.edu
or Use our teamdynamix system through the NEIUportal.