Media Systems Instructions
Projector
Push the Power button on the Projector remote.
Push Computer 1 on the Projector remote.
- Mac (desktop)
- Make sure the Mac is ON.
- Push the HDMI on Projector remote.
- Sound is controled through the Mixer located in the rack. Channel 10.
- Rack
- Be sure Power switches in the Rack is on. ( RED button to the Far right)
- The button on the left is for the lights to see the equipment better. If you turn this button on please pull out the lights when being used if not please have this button on the off position.
- Make sure sound board is on.
- Be sure any other equipment being used in the rack is on.
- Tape deck
- To use the Tape deck be sure the power on the tape deck is ON.
- Push the Open/Close button on the Tape deck.
- Insert the Tape into the deck.
- Push the buttons on the deck to control the Deck.
- Volume is controlled through the mixer located in the Rack
- CD player
- To use the CD deck make sure the power on the CD deck is ON.
- Push the Open/Close button on the Tape deck.
- Insert the Disk into the tray.
- Push the buttons on the deck to control the Deck.
- Volume is controlled through the mixer located in the Rack
- Power down (ALWAYS do this at the end of your class)
- Push the POWER OFF button on projector remote
- Push Power again to confirm shut down.
3. Remember to turn off any other device that you turned on.
4. Use the Projector remote to Power down the projector.
PLEASE SHUT DOWN THE PROJECTOR AT THE END OF CLASS!
For Help Computer or internet
Please call 773 442 4357 or 4357 or H.E.L.P or email helpdesk@neiu.edu
For Help with AV please call 773 442 5060 or callctr@neiu.edu