Podium instructions
To view any media device
- Power up projector by using Grey remote.
- Press (RED) button (on remote)
Select Source
- Each time you switch the input source, a dialogue box of your selection will display on the screen
Laptop (VGA)
VGA CABLE marked DVI
1. Find the cable that is marked DVI and plug this cable into you laptop.
2. Push DVI on the projector remote
If you wish to use your laptop, connect it to the VGA cables provided.
3. Connect the Minii Audio cable to your laptops headphone jack. 
NOTE: If you do not have a VGA port you will need to get your own adapter. Click on the ADAPTERS link and you can see the different types of adapters that are available and will have to purchase.
IF you need help finding the adapter you need to please set up a meeting with us and we will be happy to help you find the adapter you need
4. Turn on your laptop. You might want to plug in the power cord to your laptop.
- When connecting a Laptop Please remember to mirror your image by either pressing FN+F8 or
+ P (Select Mirror image). If these options do not work you might have to go to graphic display options and may need further help. If so please contact us at the number below.
-
Mac users click the Mac symbol 
choose System Preferences. Choose displays click arrangement tab. In lower left corner of the Arrangement panel select “Mirror displays”
5. For Wired Internet connection plug in the Ethernet cable into your laptop.
6. If you need help hooking up to our wireless access please click on the link Secured Wireless access or for General wireless information go to Wireless Wi-Fi/ VPN
HDMI (Digital Link on Projector) switcher input 1
1. Connect the HDMI cable to your laptop.
2. Turn on your laptop.
3. Be sure Digital Link is selected on projector remote.
4. Be sure correct input on switcher is selected.
USB-C (Digital Link on Projector) switcher input 2
1. Connect the USB-C cable to your laptop.
2. Turn on your laptop.
3. Be sure Digital Link is selected on projector remote.
4. Be sure correct input on switcher is selected.
Note: Audio is through Extron HDMI on PC selection
DVD
1. Push Video (on projector remote)
2. Make Sure the power is ON on the deck.
3. Push the VCR/DVD button to make sure DVD is selected (on DVD/VHS deck)
4. If DVD is selected you will see a DVD logo projected on the screen.
5. Push the Open/Close button on the deck to open the tray.
6. Insert your DVD into the tray and push the Open/Close button or gently push the tray.
7. Use the remote or controls on the deck to control the DVD player.
VHS
1. Push Video on the Projector remote.
2. Make sure the power in ON on the VHS deck.
3. Push the VCR/DVD button to make sure the VCR is selected (on the DVD/VHS deck)
4. If VHS is selected you will see a blue image projected on the screen.
Volume control
- Use volume control buttons on remote
Power OFF
- To turn off the projector please push the RED power button on the remote. Hit again to confirm the power off of the projector
- Please remember to turn off any other devices that you might of turned on.
Please shut down projector at end of class!
For Help with AV issues call 773 442 5060 or email callctr@neiu.edu For Internet connectivity or computer issues dial the help desk at H.E.L.P or 4357 or email helpdesk@neiu.edu
or use our teamdynamix system though the NEIUportal.