LWH 1002 Media System Information

LWH 1002

QUICK GUIDE

 

1. Be sure Mixer and Amp are on.

2. Turn on Projector using remote.

 

SELECT DEVICE

Desktop computer = Input on projector is Computer 1 on remote.

VGA Guest laptop = Input on projector is DVI on remote.

HDMI Guest laptop= Input on projector is HDMI on remote.

DOC Camera= Input on projector is Video on remote.

DVD/VHS= Input on projector is Video on remote.

 

LWH 1002 Media System Instructions

 

Volume Control

 Be sure Mixer and AMP are on. Located under Half podium.

 

LWH Lecture Hall Podium Instructions

To use the projector, follow these steps:

  1. Press the power ON button. You should hear a beep

Podium Computer = Computer 1 (on remote)

  1. Turn on the monitor.
  2. Turn on the computer.
  3. Push Computer 1 (on the projector remote)

Instructor Laptop VGA= DVI (on remote)

Connect the VGA cable to your laptop.

1. Connect the mini audio cable to your laptops headphone jack.

2. For Wired internet connection plug in the Ethernet cable into your laptop.

3. If you need help hooking up to our wireless access please click on the link Secured Wireless access or for General wireless information go to Wireless Wi-Fi/ VPN

4. Push DVI (on the Projector remote)

5. Turn on your laptop.

  • When connecting a Laptop Please remember to mirror your image by either pressing FN + F8 or   + P (Select mirror image). If these options do not work you might have to go to Graphic Display options and may need further help. If so contact us at the number below.

LAPTOP HDMI = HDMI on projector remote

  1. Turn on your Laptop computer
  2. Plug in the HDMI cable

      3.Select HDMI on the projector.

DOC CAMERA= Video

1. Unfold the Doc camera

2. Turn on the Doc Camera

3. Push Video on the projector remote

4. Be sure input 3 is selected on Extron switcher box. 

  • DVD or VCR = VIDEO (on remote)

DVD

  1. Push Video button (on the projector remote)
  2. Be sure the Doc cam is off. Be sure input 1 is selected on the extron switcher.
  3. Push the DVD/VHS button on the DVD/VHS deck. Be sure the DVD is selected. You should see a logo screen appear on the screen.

  1. Push the Open/Close button on the DVD/VHS deck.
  2. Insert your Disk into the try.
  3. Use the remote or the  buttons on the deck to control the DVD deck. Be sure to point the remote at the deck.

VHS

  1. Turn on the DVD/VHS deck.
  2. Push the DVD/VCR button on the DVD/VHS deck. Be sure the VCR is selected. You should see a blue screen.
  3. Insert your VHS tape into the machine.
  4. Use the remote or the buttons on the deck to control the VHS. Point remote at the deck.

Volume Control for each device is on the bottom left of the remote.

  • The podium amplifier includes a Main power button
    1. Make sure this is turned on. Green light should be on.
    2. Check volume dials to make sure correct knob is turned up. 

Please shut down projector at end of class 

  • To turn off projector, press the power OFF button on the remote control.
    • You will need to press the enter button to confirm.
  • Please turn off the main power of the podium amplifier as well.

For Help Computer or internet 

Please call 773 442 4357 or 4357 or H.E.L.P or email helpdesk@neiu.edu

For Help with AV please call 773 442 5060 or callctr@neiu.edu

 

 

Print Article