LWH 3005 Podium Connection Instructions
(Web cart is in the back)
Use the Silver remote to turn on the projector
Source Selection
- The only input that you will ever need to select on the silver remote is HDMI (#6).
- All switching of sources is done automatically or via your plugging in device.
Blu-Ray player
- The Blu-Ray player will typically default to your projector screen unless it is off. Be sure TV cart is also off or be sure Crestron auto switcher in on 3 and C2G hdmi switcher is on 1.
- To turn on the Blu-Ray player. The ON button is on the top/front of the player.
- Special menu options are available on the Blu-Ray player remote control.
HDMI Laptop connection
- To use a Laptop’s HDMI connection connect the provided HDMI cable to your Laptop.
- Even if the Blu-Ray player is on, This HDMI signal will override the Blu-ray player.
- The HDMI Cable also sends audio to the projector yet you may need check your system preferences to verify that the audio is routed to HDMI or Crestron.
- Be sure auto switcher went to input 2 on Crestron auto switcher
**Macintosh laptops sometimes require an adapter to connect to either HDMI or VGA cables**
Troubleshooting:
Each input is assigned a number in the black Crestron box on the shelf next to the Blu-Ray player. Each number has an LED light that shows signal to that input. Typically the following applies: 1. = Blank, 2.=HDMI Laptop, 3. =Hybrid cart Tv and Blu-Ray, 4. = VGA Laptop. If you do not see a light then no input is detected and you have a connection issue. Otherwise, the input being displayed shines green, and any other source waiting to be selected shines orange. If you need another input to display, push the designated button (if Orange) on the black box and you can switch to your device.
Crestron Auto switcher
Input on Crestron auto switcher for number 3 goes to C2G HDMI switcher. This switches the view between TV cart and Blu-Ray. TV cart on C2G HDMI switcher is 2. Blu-Ray on HDMI switcher is 1 .
C2G HDMI Switcher 1=Blu-ray, 2=Tv cart. Use Select on C2G is Auto switcher on this box does not work.
- For Wired internet connection connect the Ethernet cable to your laptop.
If you need help hooking up to our wireless access please click on the link Secured Wireless access or for General wireless information go to Wireless Wi-Fi/ VPN
VGA Laptop
- To use a laptop’s VGA connection, connect the provided VGA cable to your PC.
- Connect the mini audio cable to your Laptops head phone jack.
Be sure the audio is routed the headphone or external speaker.
- Turn off the Blu-Ray player. The ON/OFF button is on the top front of the player.
If the Blu-Ray player is on, it will always override the VGA connection!
- Please remember to mirror your image by either pressing FN + F8 or
+ P ( Select mirror or Duplicate image). If these options do not work you might have to go to Graphic display options and may need further help. If so please contact us at the number below.
- Mac users click the Mac symbol
choose System Preferences. Choose displays click arrangement tab. In lower left corner of the Arrangement panel select “Mirror displays”
NOTE: If you do not have VGA you will need to get your own adapter. Click on the ADAPTERS link and you can see the different types of adapters that are available and will have to purchase. If you need help finding the adapter, you need please set up a meeting with us and we will be happy to help you find the adapter you need
**Macintosh laptops sometimes require an adapter to connect to either HDMI or VGA cables**
TV Webcast TV cart
Use the keyboard and mouse marked Newline hybrid cart to enter in information to the hybrids carts computer. Be sure that the projector input is set to HDMI. Be sure that Crestron auto Switcher is on 3 and the C2G switcher is on 2. This will allow the image of the TV webcast cart/hybrid cart show its image on the front screen.
Web cart instructions. (This TV is a Touch screen TV.)
1) Turn on the TV. Either by the power button on TV or remote. Aim remote at power button area on TV. You will have to move Close to TV to turn on the unit.
Remotes are stored in storage bin on TV cart or at the podium. PLEASE RETURN REMOTE WHEN DONE.
2) Turn on camera using the remote. Press the power button.
(Vaddio is the camera)(aim remote at camera)
3) If wanting to project Web cart to projector select HDMI on projector remote.
4) When the camera has power, a white light along the side of the camera will turn on.
5) Be sure the correct source is selected.
There is a keyboard and use at the podium to use to control the computer on the TV.
6) To project Web cart image to projector. Turn on projector and select input 2 on Crestron auto switcher. Be sure Iomega HDMI selector is selected to 3.
Use the keyboard and the mouse at the podium to control computer in TV.
On board PC.
On the remote, be sure to select OPS (on board computer)
If it is not on when you turn on the TV push the OPS button on the TV remote.
HDMI (you can use this to connect your own laptop.) hdmi 1.
1) Be sure the correct HDMI port is selected. Push HDMI button on remote 1 time. HDMI 1 is first.
2) Connect the HDMI Cable provided into your laptop. This is located on the or in the shelf on the TV cart.
3) Turn ON your Laptop
4) If you wish to let the Newline interact with your laptop plug in the USB cable provided. This is located on the or in the shelf on the TV cart. This will not connect the camera to your laptop. This will allow the Tvs touch screen feature to act like a mouse to your laptop.
When Connecting a Laptop Please remember to mirror/duplicate your image by either pressing FN + F8 or 
+ P (Select Mirror image). If these options do not work you might have to go to Graphic display options
Web services
1) Be sure the Tv is on. If using Onboard computer push the OPS button on the remote. The PC button on remote does not mean the Onboard computer on the TV.
2) Put finger on middle of screen and swipe up.
3) Do not use any log in with name or password just tap the arrow on the password box.
4) On the TV’s built in computer go to a search engine by touching the tv where the search engine icon is located. Touch the tv where zoom icon is twice give it a few seconds to start.. If there is no zoom icon go to a search engine and on the address bar type neiu-edu.zoom.us.
5) Touch the search engine address bar. A keypad screen will show up. Touch the Tv on the keypad and type neiu-edu.zoom.us or zoom log in.
6) Use your log in to log into zoom.
7) Be sure to run a test of the camera and the mic to be sure the camera and mic on the system is working.
Remember to log out of your account when you are finished.
Camera
Use the remote to control the camera. The lens on the camera is a stationary lens. The camera moves by digital moving and zooming.
Use the arrow keys to move image left or right or up and down.
To use auto tracking use auto button on the remote. This will enable the auto features on the camera.
The auto features are auto tracking which will track any person moving within the cameras view. It also auto focus and auto zooms.
To Disable the Auto feature push the Man (manual button on the remote or any of the control buttons for the camera)
You can use the camera presets to set a camera view you would like to have the camera remember.
Hold the set button while pushing one of the number buttons for a few seconds. The camera will now remember that view.
Push the button for the saved view and the camera will go to the preset views you have saved.
Note the remote goes to standby mode after a brief period of inactivity. Press a button to wake it up.
Newline Cast / Display note
Go to the Newline onboard computer or OPS. Push OPS button on remote.
Put finger on middle bottom of screen and swipe up.
Log in screen will appear DO NOT ENTER A PASSWORD. Just hit the arrow next the box.
Window system will start up.
Go to the Newline cast Icon. Tap it twice.
Newline cast will start up.
Note: if you are planning to do multi view grid we suggest that you be sure to set DNS to Moderator mode. Do this by going into the settings icon. Touch system Icon.
If you do not have the app on your device. Go to a search engine such as google chrome. In the address bar type displaynote.com/join
This will bring up a page that will direct you to an app store
Go to app store and download app.
If you already have the app just open up the app.
Open the DN app.
Once the DN app opens you will see the following screen.
Type in the Session number on the TV into the app box that says Session ID.
Enter in a name.
The TV will now connect your device to the TV.
If you already have the app just open up the app.
Tap on the name you wish to have present. Tap invite.
The presenter will have to accept the invite.
Your presenter can now share there devices pic, mirror image, files. You can have a Max of 6 waiting presenters.
Presenters need to remember to disconnect their device when done presenting.
If doing several Presenters go to the settings and tap on settings.
Tap on session management. Select Moderator mode. Set to on.
Once set tap on x on upper right of pop up window.
Have presenters log into DN(display note).
Tap on Grid
Tap the names you want to join.
This will allow you to have a max of 4 presenters at a time at the same time. (Sound will not work with this option)
Presenters will have to accept to log on.
Once done presenters will need to disconnect for DN when finished or the moderator can tap the x in the upper right corner of presenters box.
If wanting to add a new presenter tap on the name you wish to add.
When finished tap on exit grid view.
When done with Newline cast/DN tap Exit.
Power down
When powering down the TV push the power button once and then a second time to confirm that you wish to shut down the TV. The computer will shut down with the TV.
Volume control
Use volume control buttons on remote
Power OFF
- To turn off the projector please push the RED power button on the remote. Hit again to confirm the power off of the projector
- Please remember to turn off any other devices that you might of turned on.
Please shut down projector at end of class!
For Help with AV issues or Internet connectivity dial the help desk at H.E.L.P or 4357.
Please shut down Projector at end of class
You will need to press the power button a second time to confirm shutdown.
For Help Computer or internet
Please call 773 442 4357 or 4357 or H.E.L.P or email helpdesk@neiu.edu
For Help with AV please call 773 442 5060 or callctr@neiu.edu